1966 Mustang

Top Pads Installation for Convertible

Sat Sep 19, 2009 7:53 pm
Comments: 0 Views: 1395

Once you have adjusted all the bow distances and fixed them you can now install the top pads

The first step is to secure the pad to the front bow. This is pretty easy. We secured the pads with #8 3/4 inch stainless steel screws.

The 3rd and rear bow move very easily so when you are pulling the top pad tight be careful not to move them too much. Then give them a few staples, just incase you need to adjust something. There is only about a 1/2 inch in either direction that you have an allowance for.

Now you can place the sail pads on the rear bow and staple them. They will also be bolted and stapled to the side rear tack-to-body strips that connect in the well area.

convertible sail pads

URL: http: (ex.
Math (29 + 4)
* required

© 2019 Christonium LLC
Terms of Use