1966 Mustang

Attaching the New Rear Curtain - Back Window

Mon May 27, 2013 12:50 am
Comments: 1 Views: 1387

After the top pads have been stapled you are now ready for the back window to be attached to the rear tack to body strip.


We first measured and centered how the plastic part of the window would be stapled to the tack strip. We put a little contact cement on the tack strip and placed a few staples in the plastic. Then we brought the strip with the window to the back of the car to measure if we were too high or low on the rear bow.

This step can take a while, but we found that the window should be about 2 - 3 inches below the strip. Again it matters how you measured the rear bow or you will be off.


Mon May 27, 2013 12:50 am
Name: Comment:

URL: http: (ex.
Math (23 + 2)
* required

© 2019 Christonium LLC
Terms of Use